Smt Solder Paste Stencil Printer Flat Bed Screen Printer Pcb Board
Printing Machine
Product introduction:
1. Microcomputer control, touch screen display, menu operation
interface.
2. The scraper floats. (Similar to the MPM automatic printing
machine, the scraper can float freely up and down and automatically
adjust to the level of the steel mesh).
3. The pressure of the scraper is adjustable, (the pressure of the
scraper against the steel mesh can be adjusted according to the
length of different types of scrapers).
4. Equipped with frequency converter speed regulation system, the
blade runs at a stable speed;
5. Work operation adopts two-handed key switch operation, safe and
reliable.
6. In the touch screen menu, it is possible to independently set
the pause time of the steel mesh as a whole.
7. PCB board positioning and fixing methods include reference hole
positioning, reference edge positioning and reference hole
reference edge simultaneous positioning, template positioning and
many other different precise positioning forms.
8. Time display function, automatic counting function of printing
times and screen protection function are provided in the touch
screen.
9. Equipped with adjustable scraper speed and emergency stop safety
function.
10. Printing mode: single, double and double start (menu setting is
optional).
11. Printing work status: automatic/semi-automatic/inching three
printing status (menu setting optional).
12. The worktable with large cast iron seat is stable and free from
jitter.
| Technical parameters |
Function
| This unit is used to print solder paste onto PCB board |
| Printing table sizes | 300×400mm(or customized) |
| The frame size | 370×470mm,420×520mm,550×650mm |
| PCB size | 50x50~300×400mm |
| PCB thickness | 0.2 - 5.0mm |
| Printing position fixed | PCB Outer Or Pin Positioning |
| Bedplate fine-tuning | Front/Back±10mm R/L±10mm |
| Printing precision | ±0.02mm |
| Repetitive precision | ±0.05mm |
| Minimum spacing | 0.35mm |
| Air pressure | 4-6Kgf/Cm2 |
| Power supply | 220V 50/60Hz 100W |
| Specifications |
Model No
| HR-1068 | HR-1068A | HR-1068B | HR-1068C |
| PCB size (L×W)~(L×W)mm | (50x50)~(300x400) | (50x50)~(300x600) | (50x50)~(300x1200) | (50x50)~(300x1500) |
| Steel mesh size (L×W)mm~(L×W)mm | (370x470~(550x650) | (370x470)~(550x850) | (370x470~(550x1450) | (370x470)~(550x1750) |
| Printing table sizes (L×W)mm | 300×400 | 300×650 | 300×1250 | 400×1550 |
| Machine size (L×W×H)mm | 860×760×1700 | 1060×760×1700 | 1660×760×1700 | 1960×760×1700 |
| Weight | 260kg | 300kg | 340kg | 380kg |
Inspection items before equipment use
- Please check the following items when you receive the device:
- Verify the machine model and specifications;
- Inventory tools and instructions (one manual for the machine and
one set of toolbox);
- Check the installation of electrical components and terminals for
tightness;
