Small PCB Assembly Line Wave Soldering Machine Double Wave Solder
Machine For THT
HR-200 SWave Soldering Machine
STD: Front Panel On/Off Controlled ; OPT:Touch Screen Controlled
¤ Suitable For Low Component Density Products/Low Process
Criteria/Lead Contented Products
¤ SMC Pneumatic Cylinder Driven Fluxer Spray Head Transverse
¤ 1 Infrared Preheater
¤ Modulized Preheater Structure, Convenient For Maintenance
¤ Mitsubishi PLC+PID Closed Loop Controlled
¤ SUS 316L Solder Pot
¤ Manual Solder Pot Up/Down & Roll In/Out
¤ Varies Type Solder Fingers Available
¤ Inclination Of 4-7° Adjustable
¤ Auto Finger Cleaner
¤ Crossflow Natural Air Cooling
¤ STD: Front Panel On/Off Controlled ; OPT: Touch Screen Controlled
| Model | HR-200 Panel Control | HR-200 Touch Screen |
| Machine dimension | L2550×w1350×H1550mm | L2550×W1350×H1550mm |
| Weight | 600kg |
| Color | Computer grey |
| General | |
| Main control | Panel button control | Touch panel control |
| Preheaters | 1 |
| Cooling zone | 1 |
| Cooling down slope gradient | Natural Air Cooled :3-4° C/sec |
| Exhaust requirement | ≥3m'/sec×2 |
| Compressed air requirement | >4kg/cm2 |
| Power requirement | 3 Phase 5 Cables 38oVac 50/60 Hz |
| Startup consumption | ≤17kw |
| Steady consumption | ≤6kw |
| Ramp up time | Pre-Heat : Approx 15min Solder Pot:Approx 70min |
| Temperature setpoint | Pre-Heat: Room Temp-200° C Solder Pot : Room Temp-300° C |
| Temperature control | PID Closed Loop Controlled |
| Temperature accuracy | ±1℃ |
| Temperature across deviation | ±2℃ |
| Hot air flow | Approx 50CFM |
| Process Width | 50-250mm |
| Process Height | 750mm±30mm |
| Conveyor speed | 0-1800mm/min |
| Product clearance | Reference To Finger Grooves; TopsSide ≥100mm;Underneath≥15mm |
| Fluxer | |
| Spray head transverse | SMG Pneumatic cy linder driving |
| Molecular size | 20-40 microns |
| Flux nozzle diameter | 1.3mm |
| Flux capacity | 20 liters |
| Solder pot | |
| Pot capacity | 250kg |
| Pot material | Stainless steel 316L |
| Wave displacement | Between Chip & Lambda 36mm |
| Dross amount | 0.19-0.21kg/hr |
Deatails:
Installation site:
1. Operate the machine in clear and ventilated environment to avoid
influencing welding quality by dust or others;
2. Do not install the machine near electric or magnetic
interference sources;
3. Do not let entrance and exit of machine face to fan or window
with wind during its installation.
4. Reserve space at the rear part of machine for repair and
maintenance and on the upward side for opening upper cover of oven
and installing ventilation duct (the diameters of two air outlets
at two ends of the machine are Φ195mm).
Work environment and conditions:
1. The equipment shall be placed in ventilated and dry workshop of
flat floor;
2. The temperature of work environment shall be within 5～45℃;
3. Stable power supply (well grounded by ground lead) with rated
current shall be equipped, and its voltage is recorded in the
nameplate;
Shenzhen Honreal Technology Co.,Ltdis a national high-tech
enterprise,Specializing in smt equipment research and development,
production, sales. Services for the world´s top 500 electronic
companies.The registered capital of the company is 5
million.Havingexperienced technical team andexcellent technical
innovation ability, Creating a better product supply chain and
service team and meeting differentcustomer needs is our long-term
goal. We will meet customer needs by understanding customers,
putting them first and providing valuable services.
FAQ
Q:How can you guarantee your sales’ quality?
A:We guarantees that every set of machines are under rigorous
testing before they are delivered to you, to ensure the excellent
performance of all products.
Q:How is the training?
A:After buying our machines, your engineers can go to our company
or it is so easy to operate
the machine according the training video and user manual,the user
manual will come with the machine together.
Q: I would like to ask you if it's possible to have my logo on the
product.
We hope you know that our company perfectly support customized logo
service,we’re do this. Besides, it's totally free,so just tell us
your requirements.
Q: Is it hard to use these machines?
A: No, not hard at all. For our previous clients, at most 2 days is
enough to learn to operate the machines.
Contact Us
| Company | Shenzhen Honreal Technology CO.,Ltd. |
| Address | No15,Shangnan Hongma Road, Shajing Street, Baoan District,
Shenzhen, Guangdong Province, China |
| Tel | +86755 2302 0279 |
| Fax | +86 755 2330 6782 |
| Zip code | 518125 |
| Skype/Whatsapp/Wechat | +8613715227009 |
| Email: | Monica@szhonreal.com |
