SMT Lead Free Wave Soldering Machine DIP Wave Soldering Pot
Equipment for LED production line
PCB wave soldering machine HR-300E:
1. PLC and touchscreen controlling system which can save more than
50 sets parameters.
User-frienly interface is easy to be operated,temperature can be
set/saved/modified in touchscreen.
2.The high quality sprayer provides perfect atomization performance
of the flux.It is driven by stepper
motor and rail / slider, moving speed set on touchscreen, stepper
driver and PLC control system make a
smooth and low noisy movement.
3. Forced air convection preheat zone creates enough uniform heat
for the PCB.Specially designed
preheating system makes maintenance easier,motor and blower can be
dismantled easily from
bottom,heater can be move out from rear side like drawer.
4. Adopt cast iron heater for the solder pot, its mounted outside
of the solder pot. This new assembling
way prolongs the lifetime of the solder pot.
5. Dual wave solder pot. Both wave heights are controlled
invidually by transducer. Changing the wave
height via adjusting the frequency of wave motor´s power supply in
touchscreen.
6. Solder pot is made of Ti material, 100% capable for the
lead-free solder.
7. Customer can set on and off time of machine with weekly timer.
8. Light&Sound alarm for overheating and emergency stop.
9. Ti finger conveyor system, be able to form an in-line
through-hole soldering line.
10.Customer can choose "L" finger for pallet, or dual hook finger
for pcb.
11. N2 optional for the solder pot
| HR-300E - Specifications |
| Model | HR-300E |
PCB width | 50-400MM |
| Solder pot capacity | 250kg |
| Running power/general power | 9-10KW/18KW |
| Dimension | 2900(L)*1150(W)*1350(H) |
| Net weight | 800KG |
| Controlling system | Touchscreen + PLC |
| Conveyor motor | 3Ph 220V ,90W |
| Conveyor speed | 200MM-1800MM/Min |
| Flux capacity | 6.5 liter |
| Alcohol capacity | 4.5 liter |
| PCB Conveyor direction | Left to right |
| Spray method | stepper motor drive,linear rail and slider moving sprayer |
| Sprayer | Japan ST-6 |
| Preheating zone | 1 individual bottom preheating zone |
| Preheating power | 7.5kw/zone |
| Solder pot material | Fully Ti |
| Solder pot heater | Cast iron |
| Heater power | 1.2KW*7PCS |
| Wave number | dual waves |
| Wave type | Turbulence first wave and Lambda 2nd wave |
| Melting time | 60 minutes |
| Solder pot lift up&down | Manual |
| Solder pot in&out | Motorized |
| Finger cleaning pump | 1PH 220V 10W |
| Finger type | Dual hook |
| Finger material | Ti |
| Solder angle | 5-7° |
| Air supply | 3-5BAR |
| Power supply | 3PH 380V 50HZ |
Photo Show:
Work environment and conditions:
1. The equipment shall be placed in ventilated and dry workshop of
flat floor;
2. The temperature of work environment shall be within 5～45℃;
3. Stable power supply (well grounded by ground lead) with rated
current shall be equipped, and its voltage is recorded in the
nameplate;
Before powering on, check that:
1. Supplied power is rated power of the machine or not.
2. The machine is well grounded or not;
3. All electric components are fixed or not, the contact is great
or not, and then connect each power cable of controller system.
Shenzhen Honreal Technology Co.,Ltdis a national high-tech
enterprise,Specializing in smt equipment research and development,
production, sales. Services for the world´s top 500 electronic
companies.The registered capital of the company is 5
million.Havingexperienced technical team andexcellent technical
innovation ability, Creating a better product supply chain and
service team and meeting differentcustomer needs is our long-term
goal. We will meet customer needs by understanding customers,
putting them first and providing valuable services.
FAQ
Q:How can you guarantee your sales’ quality?
A:We guarantees that every set of machines are under rigorous
testing before they are delivered to you, to ensure the excellent
performance of all products.
Q:How is the training?
A:After buying our machines, your engineers can go to our company
or it is so easy to operate
the machine according the training video and user manual,the user
manual will come with the machine together.
Q: I would like to ask you if it's possible to have my logo on the
product.
We hope you know that our company perfectly support customized logo
service,we’re do this. Besides, it's totally free,so just tell us
your requirements.
Q: Is it hard to use these machines?
A: No, not hard at all. For our previous clients, at most 2 days is
enough to learn to operate the machines.
