1. GERERAL INTRODUCTION

HR- 5800 PCBA online cleaning machine is divided into three process: chemical cleaning section, pure water rinsing section and strong hot air drying section, concrete can be subdivided into environmental isolation or chemical pre-cleaning, chemical cleaning in advance (including 1 section and 2 section), wind cut isolating 1, DI washout pollution, wind cut isolating 2, DI rinsing 1, DI rinsing 2, final DI rinsing, the air drying wind cuting 1, hot air drying, the air drying wind cuting 2, unloader.

2.CLEANING PROCESS
1. Chemical cleaning module
1.1.Chemical pre-cleaning or isolation section
Connect DI water or cleaning agent to the product for preliminary spraying cleaning, after cleaning the water orsolution flow back to the chemical tank or direct discharge.
Role: wash away the large pollutants on the board surface, such as solder ball, dust, etc., filtration system isused to avoid the large pollution flow into the water tank to block the pump.
1.2.Chemical cycle cleaning
Clean both sides of PCBA by pumping water from the solvent tank, and then return the water to the solventtank or discharge directly. Chemical cleaning is also divided into chemical cleaning 1 and chemical cleaning 2.
Role: chemical decomposition, decomposition flux internal tension, and separate flux from the surface of thePCBA by spraying water pressure.
1.3.wind cutting isolating
Clean and air-cut the PCBA board surface by the nozzle and the air knife mixing to ensure that the PCBAboard does not carry water and solvent to the next washing tank.
Role: prevent the DI water tank from contaminating the washing tank.
2. DI rinsing module
2.1DI pre-rinsing(recycle washing)
Connect DI water to the product for preliminary spraying cleaning, and the water will flow back to the pre-rinsing DI tank after cleaning.
Role: flush away the residue of cleaning agent on the surface of the board to reduce the cleaning agent into the DI rinsing section and contaminate the DI water tank.
2.2Wind cutting isolating
The PCBA board surface is cut with an air knife to remove most of the water residue from the surface andensure that no DI water is carried on the surface of the PCBA board to the drying section.
2.3.DI water cycle rinsing
Clean both sides of PCBA by pumping water from DI tank, and the water will return to DI tank after cleaning.DI water cycle rinsing is divided into two sections: rinsing 1 and rinsing 2, each with a water tank.
Role: flushing away flux or chemical residue by spray water pressure.
2.4.Final rinsing
DI generator directly supplies DI water to this section for final flushing, after which the water is directlydischarged or flows into DI tank.
Role: ensure that the cleaning medium is up to standard.
3. Final wind cutting isolating and drying
The PCBA board surface is cut with an air knife to remove most of the water residue from the surface andensure that no DI water is carried on the surface of the PCBA board to the drying section.
Role: prevent DI water from entering the hot air drying section, so as not to affect the air drying effect.
3.1.Final wind cutting isolating(cold air drying).
3.2.Hot air drying.
3.3.Cold air drying.

3.TECHNICAL PARAMETERS

Touch screen interface Electrical control box (Omron PLC)

photoelectric sensor stainless steel mesh belt

Spraying nozzle and tube Filter

Shenzhen Honreal Technology Co. Ltd. is a leading R&D and manufacturing company that specializes in providing various brands of SMT pick and place machines and spare parts , reflow oven, wave soldering machine,PCB handling equipment ect smt factory machines. An enterprise that integrates , sales and service and provides comprehensive solutions for SMT process technology. Our R&D personnel often go directly to the customer's equipment use site to understand the usage conditions of the equipment, seek the best solutions, and continuously introduce updated and improved products. Shenzhen Honreal helps you get efficient returns with the lowest cost investment, and is the most ideal choice for SMT factory users

The company has a technical engineering team with many years of experience in technology development, process operation, and technical services of SMT equipment. The company aims at stable design concepts, advanced technical levels, rigorous manufacturing processes, and reasonable sales prices. The company upholds the belief that firmness and mediocre quality are incompatible, and firmly believes that perfect quality lies in careful manufacturing. For this reason, each of the company's equipment is equipped with a detailed and rigorous production process and IPQC and FQC processes, never letting go of every detail to ensure Product stability and service life. The company's approach to employment is to discover, tap, cultivate, and retain talents. Hongrun Technology is small but ambitious, with heavy responsibilities and a long way to go.